Ask and you shall receive $855 retail, $725 for my husky bros. See bottom of page... http://www.motosportz.com/HVA-SS/HVA-SS-CHS.htm
The info from husky says 08 and up. I think that's is when the cylinder changed. But who knows, it might.
Well I am going to have to get one just to have a spare. I mean you can't be down just because your scoot is waiting for a re-sleave. My 360 is a great bike but it will beat the living crap out of you in the rocks and down fall. It just has toooooo much bottom for really tight tough running. So I will sign up as soon as they are available Kelly. I was waffling at the $850 price but at $725 I can't pass it up. You guys need to know I have everything needed to keep my 360 running at least another 10 years and my nephew got 3 large boxes of spares for my WR 250 when he bought it. So this is right in line with my ability to waste money on being prepared for the worst that rarely happens. Walt
argh, wish they fit my 04 cr125. As is it'd cost me $650 + for parts/boring/replating, and about 2 weeks down time.
It should bolt right on an '04. I have an extra 125 cylinder you can buy and we'll send our kits in together to EG. Does anyone know if it is a new cast 144 piston or just a heavier forged 125 piston with 2mm extra aluminum on it like the Weisco pistons?
Can you please post stuff like this outside the Motosportz forum. I really don't have a huge issue with it but as I am a paying sponsor here and this is the Motosportz section selling someone a cylinder and suggesting the EG kit where I am posting a 144 kit sale is a little odd. I'm not making much on this kit and slashed prices to help husky bro out. I do understand the EG kit is very good as well. So, not an issue just does not belong here. Thanks, Kelly Motosportz
hey all...i think its reeeeeeeally unfair that i cant find any bigbore kits here in the U.K i have an 04 husky sm 125 and my friends ride a Cagiva Mito and an Gilera SC125 and a Derbi GPR 125. Naturaly my bike eats them at lights and acceleration but they have top ends nearly and over 100mph. i dont want to do that kind kind of speed (yet) but i would like a bigger bore so i can get a bit more from the engine and be able to cruise at higher speeds at lower revs ( short-haul motorway use). Do you know of anyone that can supply me a BBK or point me in the right direction?? Thanks in advance
Try Huskysports in the UK, they should be able to get you one. http://www.cafehusky.com/forums/forumdisplay.php?f=60
