1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

expansion chamber to silenser coupler hose

Discussion in 'Vintage/Left Kickers' started by highdez1981430cr, Jan 7, 2011.

  1. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    What years used these?

    How long are they?

    Are they all 1 3/8" I.D.?
    highdez1981430cr, Jan 7, 2011
    #1

  2. HuskyT Moderator

    Location:
    Corona, California
    Somebody told me that you can use the coupler off of a 2000 CR250 Honda but I'm not sure of it.... might be worth investigating...


    T
    HuskyT, Jan 7, 2011
    #2

  3. Husq.fleet Husqvarna
    AA Class

    Location:
    Pendleton Oregon
    Most trucking supply shops have high temp silicone hoses, not sure if that I.D though.
    Husq.fleet, Jan 7, 2011
    #3

  4. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    My 80 390CR has one, 82 430CR doesn't, Silencer has 1-1/2" od end, & rubber piece
    is about 2.00 lg

    Husky John
    ruwfo, Jan 8, 2011
    #4

  5. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    THANKS GUYS,

    I PLAN ON BUYING A 1 FOOT LENGHT OF 1 3/8 35MM i.d. HOSE AND CUTTING IT INTO 2' LENGHTS AND KEEPING A FEW FOR MYSELF AND SELLING THE REST ON EBAY OR IN HERE. ANYONE INTERESTED IN BUYING ONE?
    highdez1981430cr, Jan 9, 2011
    #5

  6. HuskyT Moderator

    Location:
    Corona, California
    I might be interested in a piece!

    How were your seats at A1 last night High Dez...? got to see some pretty wild crashes there in the 2nd Heat race for the Lites...

    T
    HuskyT, Jan 9, 2011
    #6

  7. firecrackerkid Husqvarna
    AA Class

    Location:
    Grand Coulee, Washington
    Husqvarna Motorcycle:
    78 390 OR, 84 250WR, 83 175WR
    You are obviously the same type of carpenter as me. I cut it off twice and it is still too short.:doh:
    firecrackerkid, Jan 10, 2011
    #7

  8. dumbdotdog Husqvarna
    AA Class

    Location:
    Reno, NV
    Husqvarna Motorcycle:
    70 360 74 125SC 74 250MAG 81 250CR
    Im currently restoring a 81 250 cr and would be interested also, thanks, Nelson
    dumbdotdog, Jan 10, 2011
    #8

  9. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    Ok guys,
    I will buy the best quality i can find and make up some for us.

    I will PM you all when i get them made.
    highdez1981430cr, Jan 10, 2011
    #9

  10. dumbdotdog Husqvarna
    AA Class

    Location:
    Reno, NV
    Husqvarna Motorcycle:
    70 360 74 125SC 74 250MAG 81 250CR
    found the perfect size and application here, http://www.hiprospeed.com/ part # HTSC-138 originally designed for turbochargers, temp rated up to 350 degrees, costed me 7 dollars plus shipping, fits perfectly, I didnt even have to trim it down to size.
    dumbdotdog, Jan 22, 2011
    #10

  11. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    The ones from hiprospeed are china made,the ones i will be making up are made in the UK.

    Temp. rating is higher 392 degrees F. or 200 C.

    I will sell mine for $6 each or 2 for $10 plus the cost of shipping to you in a USPS small priority box which i believe is $4.95.

    I should have it by the end of this week.

    I.D. is 1 3/8" and black in color.

    I will cut them in lenghts of 2 to 3 inches long per your request.
    highdez1981430cr, Jan 23, 2011
    #11

  12. highdez1981430cr Husqvarna
    AA Class

    Location:
    Yucca Valley,Ca.
    I finally got the hose.

    Anyone interested in buying these pipe couplers shoot me a PM.

    3" long black high themp. silicone make in the U.K.

    1 3/8" I.D.

    $6 each or two for $10 plus shipping.
    highdez1981430cr, Feb 20, 2011
    #12