1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

How to remove throttle stop & enable the AP on a 2006 TE

Discussion in '4 Stroke' started by Coffee, Dec 28, 2008.

  1. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Coffee, Dec 28, 2008
    #1

  2. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    How to remove throttle stop & enable the AP on a 2006 TE - discussion thread

    Any input?
    Coffee, Dec 28, 2008
    #2

  3. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    ioneater, Jan 18, 2009
    #3

  4. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Links to other places are fine.
    Putting up info from your hard disc is fine.
    Copying stuff from other forums - not fine.

    Thing is this is, and will always be, a sensitive topic. In my post on the thread on TT I posted this:
    Dunno what the answer is... hey we can do anything we want on CH right? I could make it so people need to be logged in to see this section.

    That ok with everyone?
    Coffee, Jan 18, 2009
    #4

  5. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    Seems ok to me. Just want others to be aided by our work.
    ioneater, Jan 18, 2009
    #5

  6. Yossarian Husqvarna
    AA Class

    Location:
    the 'Ha
    Husqvarna Motorcycle:
    2008 TE610
    Other Motorcycles:
    Multistrada 1200 Enduro; Tiger 800XC
    Was this an '08 610? I seem to get conflicting information on the 08's as some folks report that there is no throttle stop.
    Yossarian, Jan 18, 2009
    #6

  7. ioneater Husqvarna
    AA Class

    Location:
    NW Texas
    Husqvarna Motorcycle:
    2010 TXC 250
    Other Motorcycles:
    08 Sprint
    Oops, should have been more specific for everyone here. It's on an 08 TE510, which is the same as the 08 TE/SM 250/450/510's. Don't know about 610's as it's a different engine. You're right, not everyone had a throttle stop installed when purchased from the dealer. Mine did, a few of my friends' 450/510's did not and were purchased from same dealer. I don't know the rhyme or reason for it. Perhaps some of them had dealer install power up kit at purchase time and dealer removed throttle stop along with the installation? I installed my kit personally. :excuseme:
    ioneater, Jan 18, 2009
    #7

  8. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Making a copy of this thread...

    Tech Ref --->>> 4st
    Coffee, Mar 30, 2009
    #8

  9. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    so the 08 te610 has no stop? seems like from closed to full open is very "short"
    04asphalt, Apr 16, 2009
    #9

  10. dave lindsey Husqvarna
    AA Class

    Location:
    San Antonio, TX
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2015 300 XCW/2012 CRF230F
    dave lindsey, May 30, 2011
    #10

  11. Ron West Husqvarna
    AA Class

    Location:
    Capistrano Beach, Ca
    Husqvarna Motorcycle:
    2007 TE250
    Other Motorcycles:
    Honda NX250, & 2000 Africa Twin
    Ron West, Jan 1, 2012
    #11

  12. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Yeah.. I would think that you could use a bit more power by now :)

    www.sudco.com
    "Needle Set Screw" - Sudco part # 021-727, Keihin #1421-802-2000
    This is what goes where the throttle stop was (in the top of the slide).

    Or call any fine Husqvarna dealer... that is where I got mine, but that was many years ago.
    Coffee, Jan 23, 2012
    #12

  13. Ron West Husqvarna
    AA Class

    Location:
    Capistrano Beach, Ca
    Husqvarna Motorcycle:
    2007 TE250
    Other Motorcycles:
    Honda NX250, & 2000 Africa Twin
    Thanks
    Ron West, Jan 28, 2012
    #13

  14. Ron West Husqvarna
    AA Class

    Location:
    Capistrano Beach, Ca
    Husqvarna Motorcycle:
    2007 TE250
    Other Motorcycles:
    Honda NX250, & 2000 Africa Twin
    Hey one more quick question. Since I purchased my bike used (even though it only had 100miles) I'm not sure what's been done. My throttle turns a bit less then 1/4 turn. Think that factory stop is still in there?
    Ron West, Jan 30, 2012
    #14

  15. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Pretty drastic difference with and without throttle stop - 1/8 turn instead of 1/4.

    Could still have the throttle stop in, not sure from what you typed. Pretty simple to find out, loosen the band clamp, rotate the carb a bit, take the top off.

    It is possible that the previous owner simply cut the top off the throttle stop and did not put in the actual factory replacement, many people did that.
    Coffee, Jan 30, 2012
    #15