1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 02' CR125 jetting?

Discussion in '2 Stroke' started by racemx904, Apr 8, 2010.

  1. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    What are you guys running?

    this thing is phat...
    racemx904, Apr 8, 2010
    #1

  2. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    On my '02 WR125... I ran 390 or 380 main (stock 400) depending on temp, 32.5 pilot (stock 35), 3.0 slide, 60 needle 2 clip position from top (stock 3rd), air screw 1.5-2.0.

    Common changes.... 4.0 slide (leaner), JDJ8-61 needle (leaner), R7 main nozzle/needle jet (leaner than stock R5). Slide is most expensive mod.
    Norman Foley, Apr 8, 2010
    #2

  3. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    cool...thanks
    racemx904, Apr 8, 2010
    #3

  4. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    It's got a 400 main in it now..just put in a 144 kit.
    R_Little, Apr 8, 2010
    #4