04 TE 250 Carb Settings

Hi all, wanted to get some suggestions. I recently sent my carb to Hall's for the modification. Put the carb back on. The bike starts much better but still has a sputter/hesitation then a kick when pulling back throttle slightly or trying to cruise along at a steady speed. Bike seems ok when I really get on it and rip through the gears.. Here are my current settings, stock pipe and I basically ride at sea level to about 1600 FT

Pilot: 25
Needle: 10E01-53 (Needle in 4th position)
Main Jet: 157.5
Accel Pump Jet: 35

Fuel screw is two turns out...

Thanks for the help