1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

05-07 plastics to -04 TE510

Discussion in '4 Stroke' started by vlgu, Aug 6, 2009.

  1. vlgu Husqvarna
    AA Class

    Location:
    Estonia
    Hi,

    If I'd replace my fuel tank with 05-07 fuel tank and make other smaller mod.-s, would I be able to mount 05-07 plastics on my -04 TE510?

    Or will I run into too many problems?
    Has anybody tried it?

    BR
    vlgu, Aug 6, 2009
    #1

  2. markymark83 Husqvarna
    A Class

    Location:
    Australia
    Pretty sure you can do it, main things you need to change is the Tank and seat. From memory I think the 04's and 05's are the same frame. I've had a 05 tank on my 04 once just to see if it would fit. Lined up perfectly.
    markymark83, Aug 7, 2009
    #2

  3. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    Although I've not done this, people have said it can be done without problems. Newer tank on a 2004 will allow newer plastics to be used, you could choose red/white (2006 TC, or 2007 TE) or blue/yellow (2006 TE).
    Coffee, Aug 11, 2009
    #3

  4. 7point62 Husqvarna
    AA Class

    Location:
    Southwest England
    Husqvarna Motorcycle:
    2004 TE450
    Other Motorcycles:
    2001 Kawasaki TR250
    I'd really like to try this too. I just had a fun half-hour wrenching the ill-fitting original plastics back on my '04 450. Funnily enough my spare plastics (made by UFO) are a much better fit, but I'm saving them for Sunday best. Bodywork for pre-'05 bikes is impossible to find here so breaking stuff isn't an option!.
    7point62, Aug 11, 2009
    #4