1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 06 125 rear brake

Discussion in '2 Stroke' started by James Patton, Jun 22, 2013.

  1. James Patton Husqvarna
    AA Class

    Location:
    Edwardsville, ILL
    Husqvarna Motorcycle:
    TE511 2012, WR125 2006
    Other Motorcycles:
    1250S Bandit, DRZ400S
    Rear brake rotor has a little play in it, is it common to replace the rotor holding discs?
    I don't see specs/measurements, I can just purchase rotor and the holding discs, but would
    rather not.
    James Patton, Jun 22, 2013
    #1

  2. Idacurt Husqvarna
    AA Class

    Location:
    hailey,ID
    Husqvarna Motorcycle:
    07 WB177
    Other Motorcycles:
    Scorpa 175
    I went to my local hardware store and found some rubber O rings to put on those hubs/discs and it made everything quiet with minimal play.That was a year ago and everything still seems fine.
    Idacurt, Jun 22, 2013
    #2

  3. Aviduser Husqvarna
    AA Class

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    08 cr 165
    Both huskys I've owned had play in the floating rear disc. From day 1 so nothing to worry about.
    Aviduser, Jun 22, 2013
    #3