1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc 07 WR125 pipe

Discussion in '2 Stroke' started by Idacurt, Jul 1, 2009.

  1. Idacurt Husqvarna
    AA Class

    Location:
    hailey,ID
    Husqvarna Motorcycle:
    07 WB177
    Other Motorcycles:
    Scorpa 175
    what is the best pipe for low end gains?
    Are any of you guys running a Dynoport pipe?
  2. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I have tried a few pipes and REALLY like the Doma. :thumbsup:
  3. Idacurt Husqvarna
    AA Class

    Location:
    hailey,ID
    Husqvarna Motorcycle:
    07 WB177
    Other Motorcycles:
    Scorpa 175
    Doma does not list a Husky pipe online?

    I spend most of the time between 1st-3rd on single tracks,where does the Doma make its power?
    Thanks
  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Mid.

    Langston racing used to import them, they no longer do but could order you one ($$$).

    Here is my 04 with a Doma...

    [IMG]

    Here is my 09 WR125 with the same Doma forced to fit it :D

    [IMG]
  5. HuskyDude Moderator

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    13/TR650
    Other Motorcycles:
    10/EC300, 76/TY175
    I notice your skid plate on the 04...:D NICE

    Any news yet on the 09...
  6. ajaxauto Husqvarna
    Pro Class


    Best thing you should do to your bike is gear it down i run a 52 rear sprocket.Makes the bike perform better in every gear.I race desert and now 6th is usable all he way to about 70 mph.As for a pipe i use a FMF
    Fatty with a turbine core spark arrestor This i did on both my 2006 and 2008 CR 125
  7. raisrx251 Husqvarna
    AA Class

    Location:
    Virginia
    I had a '07 WR 125 and if I remember correctly the opening of the silencer is pretty huge on that bike. The shorter and smaller opening silencer will give you better bottom end. The length of the pipe coming out of the head will also increase bottom end, longer (5-10mm) is better bottom end. Pretty sure I ran a FMF non sparky on mine.

    Hey Kelly, what kind of mods did you have to do to get the Doma to fit. I assume it is from the '02-'08 era.
  8. Idacurt Husqvarna
    AA Class

    Location:
    hailey,ID
    Husqvarna Motorcycle:
    07 WB177
    Other Motorcycles:
    Scorpa 175
    That is the sprocket I'm running on the back.Does the fmf make power down low?
    I called Dynaport,they offer a pipe for low end but only to an 02 wr125.
    The owner said he would send me the main chamber without the clamps and stinger and I could weld to fit my bike.
  9. john01 Husqvarna
    Pro Class

    Location:
    Powhatan VA
    Good question on the FMF. I am looking into getting one or something for my 08 CR125. I ordered the 52 rear sprocket yesterday. Anyone?
  10. Poopy Husqvarna
    AA Class

    Location:
    Kamloops, BC
    Husqvarna Motorcycle:
    WB165
    Bump on the FMF pipe?? Any good?
  11. NWRider Husqvarna
    AA Class

    I believe you can run the older style (02) pipe if you use the older silencer. I think all the mounts are the same.
  12. Idacurt Husqvarna
    AA Class

    Location:
    hailey,ID
    Husqvarna Motorcycle:
    07 WB177
    Other Motorcycles:
    Scorpa 175
    Thanks for the info