1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 07 WR250 w/PWK carb throttle cable problem

Discussion in '2 Stroke' started by MARK WOOLARD, Jul 17, 2010.

  1. MARK WOOLARD Husqvarna
    AA Class

    Location:
    Brandon Mississippi
    I changed to the PWK carb from Motosportz and I have had the stock cable pop off of the slide twice.. Has anyone had this happen? Is there a better cable to use, or do I just need to get a new one? I don't want this to happen out on the trail!
    MARK WOOLARD, Jul 17, 2010
    #1

  2. kx3089 Husqvarna
    AA Class

    Location:
    western pa
    Husqvarna Motorcycle:
    wr250
    I use a 1999 honda cr 250 cable.Do you have the plastic cable guide positioned properly? It has a little tab on it to keep the cable in the groove in the slide.
    kx3089, Jul 17, 2010
    #2

  3. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    As kx3089 stated, as long as the cable is set in the holder properly the stock cable should work fine.

    The only thing I can think of that might be a problem is excess slack in the cable and the '99 CR cable will fix that, but the white plastic keeper normally stops that from happening.

    Motion-Pro has a good '99 CR cable that you can get for less than $15.
    MOTORHEAD, Jul 17, 2010
    #3