1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

125-200cc 08 Cr125?

Discussion in '2 Stroke' started by dartyppyt, Feb 19, 2010.

  1. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    Might be able to get a deal on a 08 Cr125 like new.

    I would probably do the suspension and EG 144 Kit?

    Still competitive for Harescrambles?

    What are your thoughts?
  2. Drew Smith Husqvarna
    AA Class

    Location:
    Hope N.J. U.S.A.
    Good choice!!
  3. john01 Husqvarna
    Pro Class

    Location:
    Powhatan VA
    Check with ajaxauto his son is sporting a #1 plate. I love my 08 CR125 it's my all time favorite bike and at 51 years old now I had quite a few bikes. You looking at the one on ebay for $3,000.00? Get it!
  4. skid Husqvarna
    A Class

    Location:
    NH
    I got an 08 cr 125 last year ... I blew the top end and got it 144'ed. I think if I knew more about jetting I not only would not have popped the top end but I probably could have got along just fine with it as a 125. My advice would be to get wallybeans spring kit and get the power valve and jetting dialed before you go 144. My 144 came back when the snow was on the ground .. no ride report yet.
  5. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    I am seriously thinking about it. I have an 08 WR250 and will probably go 144 kit down the road.
    Kinda been following you guys with the resilts your getting on the smaller two smokes.
    I am getting older and might be fun to throw this around.
    Does anyone know if my shock and fork will interchange from my WR250?
    It is already resprung and valved.