1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc 09 300

Discussion in '2 Stroke' started by bsh7680, Aug 24, 2011.

  1. bsh7680 Husqvarna
    AA Class

    Location:
    Cookeville TN
    Husqvarna Motorcycle:
    12 CR 150
    Other Motorcycles:
    04 PW 50, 08 KTM 50 JR Pro
    Had an 09 WR 300 for about a year only problems I have found is starting and seems to stall a little easy. Will a flywheel weight help this or do I need to do something esle. I love everything else about the bike, but need to get this figured out to quit thinking about those darn orange bikes I came off of!
  2. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    You need to look at your jetting
  3. hogwackr Husqvarna
    AA Class

    Location:
    pennsylvania
    Husqvarna Motorcycle:
    18 TE 250
    Other Motorcycles:
    13 HD Street Glide
    +1. You can ride these things like a tractor if you have your jetting right!
  4. firecrotch Husqvarna
    Pro Class

    Location:
    north bend, wa
    Husqvarna Motorcycle:
    2009 wr300
    Other Motorcycles:
    2007 ktm 950SM
    I swapped out my carb for a pre jetted kehin and the bike purrrrrsss now.
  5. lankydoug Husqvarna
    Pro Class

    Location:
    MO
    Husqvarna Motorcycle:
    WR
    Other Motorcycles:
    TM 300en
    Probably the pilot is too rich, I'd at least start there.
  6. marcmo0 Husqvarna
    AA Class

    Location:
    Auburn, WA
    Husqvarna Motorcycle:
    09 WR300
    Other Motorcycles:
    Yamaha YZ250
    I agree that it is most likey a jetting issue. I also have an 09 300. I swapped the carb to a Keihin pwk 38 and it is worth every penny. I was jousted off my bike by a fallen tree the other day and flipped over backwards and upside down. My bike didn't stall As I was rolling around in immense pain, my friend rolled up and said "Your bike is still running...That is amazing...I can't believe your bike is still running" True story. With the proper jetting the motor will run to an extremely low rpm without stalling.
  7. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    I sent my 09 WR300 Mikuni to RB Designs www.rb-designs.com and their work crispened it right up on the bottom end.
  8. RobNewy Husqvarna
    B Class

    Location:
    Australia
    Mine is exactly the same.
    http://www.cafehusky.com/threads/09-300-idle-speed.19420/Try some of these ideas.

    What is your current jetting?