1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 09 CR125 supension/linkage slop

Discussion in '2 Stroke' started by montgob1, Apr 20, 2011.

  1. montgob1 Husqvarna
    A Class

    On my new CR i have about 2-3mm of free verticle movement at the axle when the bike is on a stand. It looks like the top bearing or bolt on the shock is the culprit but i havnt pulled everything apart yet. The bike only has 3 dry track rides on it so i doubt i lost a bearing. Anyone else seen this and is there a fix?
    montgob1, Apr 20, 2011
    #1

  2. dirt-dude Husqvarna
    AA Class

    Location:
    Pa.
    All 3 of my Cr's have a small amount of play at the top of the shock, never has gotten any worse. Always thought it was normal because they all had it and seems to
    not affect handling.
    dirt-dude, Apr 20, 2011
    #2

  3. montgob1 Husqvarna
    A Class

    ok, thanks for the response. My KX never had any movement in the pivots? I dont notice it when riding but that clearance is room for dirt and mud to accumulate. I will post a solution when i tear the bike down in a couple weeks to service the bearings.
    montgob1, Apr 20, 2011
    #3