250-500cc 09 WR300 Brake Rebuild

Husky doesn't sell any parts to rebuild either the front or rear master cylinders but KTM does. Any idea which KTM parts work?
Thanks

Tried a big dollar ktm rebuild kit for an '06 husky wr250 rear master
ended up just using the seals as the piston did not fit-too big

Have a look at this site and possibly call them up, l'm sure they could match the master cylinder part number to the appropriate kit or at least parts required.
http://www.oppracing.com/category/7...rts-for-master-cylinder-not-including-levers/

that's odd. who'd you call rob?

No one, service manual says not to screw with it and the parts fiche has no part numbers except for the complete master cylinder

OMG has the link for sure for the OEM stuff.

Or try calling George @ Up-tite. 714-540-2940 or Halls or Tasky's etc! it's just a seal kit or cup seals. aint called George in eons so...not sure if he's still around. he usually has that stuff laying about as he does with Magura seals too.

I have picked that stuff up from Brian at BMP. Seems like it was Magura packaging
503 585 1153