'12 Husky TE310 KickStarter Lever Help Needed

Hi Husky friends! I have been struggling to get a KickStarter Lever for this new bike to me. The electric start has been removed, and the kickstart lever was missing upon purchase. I ordered a 2012 TE310 Lever from a motorcycle reseller and the diameter for the shaft was too big. I ordered a Moose Racing Lever (KTM/Husq 80-0563-00-60) and it is also too big of a diameter to fit the shaft.

This made me start to think that I just might have a weird shaft size in my bike. CAN ANYONE MEASURE THE DIAMETER OF THIER KICKSTARTER SHAFT? This way I could compare it to mine.

Here are my measurements in both inches and metric:

0.605 inches


and 15.35 in mm


On the shaft, there is 30 indented spline grooves if I counted them correctly.

The Husky kickstarter part number is 8000H2252 or 8000A7092 and is used on 2010,11 TE/TXC?TC 250's and 2013 TE/TXC/TC 250 and 310's if my check is correct.

If anybody can help me with this information or on where I can get a Kick Starter Lever for this bike, it would greatly be appreciated.

Thanks!!!

There was an update kit available due to the splined shafts breaking. You might want to try to find an updated shaft and use the kickstarter you bought.