125-175 pro circuit pipe

[fredHVA79]

hello there.
for a long time i am searching for this pipe.
but it seems to be impossible to find.
some of us have this pipe on her bike.
It will be nice to have the dimension to make a reproduction.
many thanks by advance.
sincerely
@+fred

 

[Michel Dufayard]

I've seen one on eBay 1 or 2 years ago but couldn't buy it.
Where do you live ?
175 PC pipe are good for 175- 82 bike.
I've read that 125 and 175 pipe in 83 are the same.

 

[suprize]

any half descent pipe man could whip up a trick pipe for you unless you wish to replicate a "pro circuit "bike.

 

[fredHVA79]

the 125 pipe is the same from 78 to 82!
i want to replicate for a better result and also have the pro circuit look

hello michel:france .rhones alpes

 

[suprize]

try geoff morris concepts in Victoria Australia. he makes pipes and has a lot of dimensions on file. google him. even better here his website

www.geoffmorrisconcepts.com

 

[Michel Dufayard]

Quote"the 125 pipe is the same from 78 to 82!
i want to replicate for a better result and also have the pro circuit look

hello michel:france .rhones alpes "

OK you must find someone who has one PC pipe to give good measures.
And also find a good pipe maker in France !
Do you have a 175 cylinder ?

PM sent

 

[Kartwheel68]

That bottom picture is my bike with the HP 175 kit. That pipe does not work well with the 125, I tried it with my 125 top end before I put the 175 top end on it. The stock pipe is better on the 125 the kit pipe only works well with the 175 top end. I know many people have used a Suzuki RM125 pipe and made some slight modifications to fit it to the Husky 125, that is basically what the PC pipe was, in fact, I think the first PC pipes were modified Suzuki pipes.

 

[fredHVA79]

ok kartwheel
many thanks for the advices
nice to know that the pipe don't work well withe the 125 cylinder
will try with a rm
someone have try the jemcoexhaust?
sincerely
@+fred

 

[Michel Dufayard]

The RM suz looks like the hva 125-83 !

 

[Kartwheel68]

Yes, that is the pipe. The early PC pipes of '80-'81 look exactly like that, not like the one later like came in the 175 kit. The above pipe needs some slight modification, but will fit without much effort.

Also, I forgot, the 175 kit pipe has a MUCH larger exhaust manifold port and head pipe size, you also have to have the 175 kit manifold to use the pipe. I think the large manifold size is the reason the pipe does not work well with the 125 cylinder.

 

[Joe Chod]

husky pipe slid over the small exhaust manifold stub. hot ticket was to use the larger one on the 125 (from 250).. The RM pipe fits "into" the RM cylinder. same basic shap ohter wise except the stinger end Husky is straighter and also position of the mid pipe hanger bracket but 1979-80 RM pipe very very close

 

[oldmxracer]

Yes, PC pipes were modified Suzuki pipes verified by Mitch himself to me a few years ago.....

 

[Kartwheel68]

There you go, start looking for '79-'80 RM125 pipes.

 

[visiteur1948]

pipe 125 ?

pipe 125 ?

pipe 125 ?

pipe 125 /175 HVA

 

[visiteur1948]

my pipe 125 WR 1983
in 125 WR 1982
but y change after !
no good beautiful !


after pipe in my bike
125 WR 1982
good !

 

[Michel Dufayard]

I think that the Suzuki pipe looks like the 83 - 125 pipe !
Here's a pic of 125 rm.

 

[fredHVA79]

hello visiteur
the 1983 pipe don't work on a standard cylinder 125?
have you tested this?
the second one is the jemco?
@+fred

 

[visiteur1948]

pipe 1983=cylinder 1983
and cylinder CR /XC 1982
(mikuni 38 + 6 red valve !)
test not good !

pipe jemco=cylinder 79/82
(bing 32 + 4 red valve )
ok

now my bike 125 WR 1982 is=
pipe JEMCO usa+
+ carburetor 34 mm
Kawasaki KX +
rubber air box
125 CR 1982
husqvarna
(picture)

 

[visiteur1948]

pipe Suzuki 125 1980
e bay usa
100 $ us

pipe Suzuki 125 1980
le bon coin france
60 euros

 

[fredHVA79]

have found a 125 suz 78 pipe.
very close from the 83 125 but not really the same



ll