1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    TE = 2st Enduro & TC = 2st Cross

TE/TC 14' te300 runs for 5 minutes and dies

Discussion in '2st' started by racemx904, Nov 7, 2015.

  1. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    My brother will start it, ride five minutes and it'll die like its fouling a plug...kick kick kick no start.... 2 minutes later fires up

    New plug, yellow and white wire unplugged
  2. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    Float needle sticking and not getting fuel all the time?
    Tinken and robertaccio like this.
  3. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    those also sound like when coils and or ignition fail thing heat up and go open but that is 100% armchair...
  4. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    No spark he messed with float
  5. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    Lil bit of mud
  6. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
  7. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    is it just me or is that one pole smoked??
    reveille likes this.
  8. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    Fire, Fire!
  9. reveille Husqvarna
    Pro Class

    Location:
    Northern Illinois
    Husqvarna Motorcycle:
    2014 FE501
    Other Motorcycles:
    2015 300 XC W
    You said smoke pole...hehe
  10. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    no thats the way they are..... not sure why
  11. reveille Husqvarna
    Pro Class

    Location:
    Northern Illinois
    Husqvarna Motorcycle:
    2014 FE501
    Other Motorcycles:
    2015 300 XC W
    Like you said though, obviously the stator cover was not sealed properly.
  12. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Wow that's pretty dirty and rusty in there. That can't be a positive contributor.
  13. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    def will pull mine and inspect it.
    on my Italian huskys every couple of months (they were wet/oil stators) I would pull off the cover and clean all the particles out, the mags always had a lot of stuff stuck on them.
  14. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    Yes it would be a good idea.... he's going out to test after the clean up today.... but I highly doubt it will work
  15. Tinken Husqvarna
    Pro Class

    Location:
    Hesperia, CA
    Husqvarna Motorcycle:
    MY12 WR511
    Other Motorcycles:
    Yamaha
    If you can figure out how to seal it up, you can fill it full of concentrated antifreeze (no water). It keeps the stator cool and contaminate free.
    87husky500xc and NCSteve like this.
  16. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Interesting, never heard of filling statir cover with antifreeze
  17. reveille Husqvarna
    Pro Class

    Location:
    Northern Illinois
    Husqvarna Motorcycle:
    2014 FE501
    Other Motorcycles:
    2015 300 XC W
    I've heard of sealing the bottom weep hole, adding 3 ounces of atf and adding a top vent line through the electrical grommet. Wet mod is what they call it. Mixed reviews but mostly positive.
  18. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Any convos on here before about this wet mod? Please direct me, want to hear more
  19. reveille Husqvarna
    Pro Class

    Location:
    Northern Illinois
    Husqvarna Motorcycle:
    2014 FE501
    Other Motorcycles:
    2015 300 XC W
    Not on here from my memory but lots to glean on ktmtalk
  20. Billd Husqvarna
    AA Class

    Location:
    Pensacola FL
    Husqvarna Motorcycle:
    1975 CR 360 GP, 2015 TE 250
    sounds like its time to save up for a Trail Tech stator......