1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 144 powervalves

Discussion in '2 Stroke' started by Parfo79, Nov 14, 2010.

  1. Parfo79 Husqvarna
    A Class

    Location:
    S Wales, UK
    Husqvarna Motorcycle:
    '98/'05 CR125, '00 CR250
    Other Motorcycles:
    many...
    Sorry if this has been discussed before but i couldnt find it. When you upgrade a cr125 to a 144 do you have to modify the powervalve or head or is it a case of boring out the cylinder and fitting a 144 piston?
    Parfo79, Nov 14, 2010
    #1

  2. surfer1100 Husqvarna
    AA Class

    Location:
    Ottawa, CAN
    Husqvarna Motorcycle:
    09 WR250, Memories of past tiddlers.
    Other Motorcycles:
    TM-01 EN 125, 03 125 MX, 09 EN 155
    Yes, they have to be modified. Usually the company doing the job does it. In the case of the OEM kit, proper powervalves are supplied.
    surfer1100, Nov 14, 2010
    #2

  3. Parfo79 Husqvarna
    A Class

    Location:
    S Wales, UK
    Husqvarna Motorcycle:
    '98/'05 CR125, '00 CR250
    Other Motorcycles:
    many...
    Cool, thanks. If it was going to be as simple as new piston and bore I was going to go 144 but might think of a 167 in that case.
    Parfo79, Nov 14, 2010
    #3