250-500cc 15T countersprocket, does it fit WR 250/300?

I went up to 14 from the stock 13, and it is much better.
Yes, including tight snotty hills.
I know the 15 will be to tall for the woods but sometimes I ride with guys with big diesel..er.. I mean four stroke dualsport bikes.
So I was just wondering if anyone has fitted one up on a 250 or 300.
Does it clear the stock cover?

When you install a six speed the 15T is the CS of choice. It fits fine, although there is only about 1/8" clearance with the swingarm. On the CR 5 speed you actually get some decent cruising speeds but it is definitely tall for woods duty.

Walt

Thank you

I wish it was a six speed

The 15T on my 5 speed WR250 with an auto clutch is magic, even in tight eastern woods. 1st gear is a little tall but the auto clutch solves that.
The 15T spaces out the gearbox nicely.
Also with the 5speed, 1st is used often, where the 6speed 1st is rarely used except for extreme obstacles and river crossings.
I've been running the 15T/autoclutch combo for 3 years now, I love it.

Tonight i will install a 15T on my WR300.
I will post the result after a couple of test.
I think the 300 will take it no trouble even in the very tight stuff, this motor just refuse to stall or die in the low rpm range.