1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 165 oil change ?

Discussion in '2 Stroke' started by Russ Henry, Jun 16, 2013.

  1. Russ Henry Husqvarna
    AA Class

    Location:
    Seattle Washington
    Husqvarna Motorcycle:
    2013 TXC 310
    How do I drain the tranny oil ? Was not in the manual and can't find it in the data base threads.
    Thanks
    Russ Henry, Jun 16, 2013
    #1

  2. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Just unscrew the 12mm bolt . Should be 800 mil oil dry or nearly that wet
    rockdancer, Jun 16, 2013
    #2

  3. Russ Henry Husqvarna
    AA Class

    Location:
    Seattle Washington
    Husqvarna Motorcycle:
    2013 TXC 310
    Which 12 mm bolt ?
    Russ Henry, Jun 16, 2013
    #3

  4. Troy87 Husqvarna
    B Class

    Location:
    Australia
    Husqvarna Motorcycle:
    2013 WR165
    Other Motorcycles:
    1977 Honda XR75
    Pretty hard to miss, the 12mm bolt on the underside of the gearbox, pretty much in the middle, have a look, you wont miss it
    Troy87, Jun 16, 2013
    #4
    rockdancer likes this.

  5. make meh samich Husqvarna
    B Class

    Location:
    Australia
    Husqvarna Motorcycle:
    2013 wr 125
    Other Motorcycles:
    1980 honda z50
    Type f? I got nulon stuff that says type t. He reckons f means ford! Sound right?
    make meh samich, Jun 18, 2013
    #5

  6. make meh samich Husqvarna
    B Class

    Location:
    Australia
    Husqvarna Motorcycle:
    2013 wr 125
    Other Motorcycles:
    1980 honda z50
    Wow. Bloke at shop was well wrong then! What brand are you using?
    The nulon multi vehicle bottle says nothing about friction modifiers.
    make meh samich, Jun 19, 2013
    #6

  7. Kyle Tarry Husqvarna
    Pro Class

    Location:
    Portland, OR
    Husqvarna Motorcycle:
    2012 WR 300, 2006 TE 610
    Other Motorcycles:
    Ducati Monster S2R 800
    Any motorcycle-grade 10W-40 oil will be fine too. I just use the same 10W-40 oil (Motorex, Maxima, Mobil, whatever) that I use in some of my other bikes.
    Kyle Tarry, Jun 19, 2013
    #7

  8. make meh samich Husqvarna
    B Class

    Location:
    Australia
    Husqvarna Motorcycle:
    2013 wr 125
    Other Motorcycles:
    1980 honda z50
    Im using motul at the moment and feel like it should race shift better. Clutch drag makes it hard to start in gear too. Thought I might try atf.
    make meh samich, Jun 19, 2013
    #8