1976 CR 125 Clutch Cover

Hi guys

I'm trying to source a clutch cover to suit a 1976 CR125. This is the old style motor cases same as (1974) so not the newer mag engine. This cover moves the gear shift up into a similar position as the mag engines and I think was a one off for this year. See ohoto for reference. I'm in Australia so if someone has one please email me: don@cycleproducts.com.au many thanks.

Thanks John - if you can locate it please and send a photo, I should be able to confirm it. But if it fits 74 cases and the gear lever is not at the bottom of the cover and inside the cover there is a gear link, should be the right one. Let me know. cheers Don

That is for the "new" engine.. that cover is like a Mikkola 250/360 engine..it needs to be like the 72/3/4 125 engine which has a different clutch cover.. same type of gear change mech because the engine was moved down in the frame when put into a GP frame.. Anyone..??

I'm quite sure I have a spare 74 125 WR clutch cover...
But I'm also quite sure it does NOT have any type of "gear change mech" or linkage.
Just the shaft that extends through the cover...the inside end has the split that goes over the internal shift pin.
I'll post a photo tomorrow...

This is what you need.One year cover.PM me