1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

1981 CR250 Rear Sag

Discussion in 'Vintage/Left Kickers' started by LarryC, Jul 16, 2010.

  1. LarryC Husqvarna
    AA Class

    Location:
    Bethel Park, Pa.
    Anyone know the proper rear suspension sag amount on a 81 CR250?
    Bike has the factory stock Ohlin shock/springs installed.

    Thanks,

    Larry C.
    LarryC, Jul 16, 2010
    #1

  2. Tahitian_Red Husqvarna
    AA Class

    Location:
    Sacramento, CA
    I don't know the exact amount, but the general rule of thumb I use on my twin shock bikes is 1/4 to 1/3 of the total travel. 12 inches of travel would then equal 3 to 4 inches of sag.

    That just what I do and others might have more experience with Huskies.
    :)
    Tahitian_Red, Jul 16, 2010
    #2