1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

1982 250xc Calif desert jetting ?

Discussion in 'Vintage/Left Kickers' started by richzajic, Jul 19, 2016.

  1. richzajic Husqvarna
    AA Class

    Location:
    El Segundo, Ca.
    Husqvarna Motorcycle:
    1982 Husqvarna 250XC and WR
    Anyone have or know jetting that works local so cal desert ?

    I should probably just call Up Tite

    Needs some parts also.
  2. Bigbill Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    '83 250wr
    Other Motorcycles:
    0 right now
    My advise is to make sure your using the mikuni needle and seat with the extra three holes for more gas flow. These huskys came stock with them. I say this incase someone changed them.
  3. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    needle seat?
    a type 166 needle jet you mean?
  4. NissanMike Husqvarna
    AA Class

    Location:
    southern OR
    Husqvarna Motorcycle:
    87 frankenhusqy
    Other Motorcycles:
    82 yamaha tt250 86 honda xr250
    I think he means fuel inlet side. Float needle.
  5. stormer254 Husqvarna
    AA Class

    Location:
    England
    Husqvarna Motorcycle:
    More than I dare let her know
    Other Motorcycles:
    Yes!
    What that means is they use a lot of fuel WFO!
  6. Bigbill Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    '83 250wr
    Other Motorcycles:
    0 right now
    Yes they need lots of fuel in the desert with wot. Gas flow is the key. That's why all these orginal husqvarnas came with the extra three inlet holes in the needle and seat body. I'm saying make sure the PO never changed it is it. Just a caution check.
    richzajic likes this.