1982 WR 125 Carby.

Hi,
I purchased a 1982 WR 125 off ebay, it wasn't complete, missing a carby and a few other parts. So seeing that I have to find a carby for the WR, what do the Husky Experts recommend I go for, do I stick with the Bing, go for a Mikuni (easy to source and get parts) and what size should I use. Stick with the 32mm, or go for a 34mm or even a 36mm. I know there are many options, just after some thoughts on the different ones available.

LOOK PICTURES
1 Keihin 35 mm HONDA CR
2 Mikuni 36 mm
( spécial PRO-CIRCUIT )
3 Bing 32 mm and 1983 pipe 125
(my WR 1982 )

Y préfère for me MIKUNI 36 mm
and pipe HUSQVARNA 1983 !

Hi visiteur1948,
Thankyou for your reply, good to see someone else with a interest in Husky 125's.
I don't have the CR barrel, with the larger reed valve and I have the 82 WR pipe, so mine is like photo1 and 3, so I'm thinking of going the Keihin 35 mm off of the Honda CR. Have you tried the 82 WR pipe, I know it's fairly basic the 82 WR pipe, what difference did the 83 pipe make to your WR 1982 ?

motor CR 1982
= motor CR and WR 1983
mix possible ! picture two !

picture one pipe
original and KEIHIN 35
=good motor !
for enduro !

picture two
= 1982 CR good motor
mikuni carb 38 mm !
for MX ! spécial pro-circuit

picture tree
my WR mix 1982/1983
pipe 1983/BING carb
2.80 needle jet
y prefère for enduro !

others pictures
1 CR 1982
2 WR 1982 pipe YAMAHA YZ
and carburetor MIKUNI 38 mm VM!

In the first photo with the 35mm Keihin, what rubber intake boot is used, is it the same as used with the Mikuni on the CR.
Do you have any other photos of that setup from a different angle.

no excuse me picture one motorcyle is sale
but is HONDA CR 125 rubber !

but look picture
this motorcyle sale ebay motors have
MIKUNI 38 mm and pipe YAMAHA ? SUZUKI ?
HONDA ?KAWASAKI ?

other motor ( at me ) and picture today
rubber original HUSQVARNA
carb BING 32 /84 original HUSQVARNA 125 /1982
carb MIKUNI 38 TM HUSQVARNA 125 / 1983