1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

1983 Service manual

Discussion in 'Vintage/Left Kickers' started by bultokid, Dec 11, 2009.

  1. bultokid Husqvarna
    AA Class

    Location:
    Houston, Tx
    Husqvarna Motorcycle:
    '84 250/500 '87 250/430 '18TC250
    Other Motorcycles:
    Bultaco, Fantic
    bultokid, Dec 11, 2009
    #1

  2. HuskyT Moderator

    Location:
    Corona, California
    Lucien (White Husky) just sent me one last week for posting !. I beleive it is what you may be looking for. Will review and confirm tonight.

    I have it downloaded but not posted yet!

    I have not yet had time to post it but will try and get the 83 manual posted up in the vintage Tech Ref section this weekend. Might be a s late as Sunday night.... to many Christmas parties and events going on this weekend!!!

    Merry Christmas!

    Thanks, T
    HuskyT, Dec 11, 2009
    #2

  3. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    I've got a 1983 Husky owners manual & parts manual scanned if
    Husky T doesn't find it.

    later
    John
    ruwfo, Dec 11, 2009
    #3

  4. White Husky Husqvarna
    AA Class

    Location:
    UK
    Hi Tim, I don't have the detailed workshop manual for '83; what I sent you was the
    • 1983 Husqvarna Dealer assembly manual.pdf (14 pages)
    • 1983 Husqvarna Dealer mounting instructions.pdf (10 pages)
    • 1983 Husqvarna Owners Manual.pdf (72 pages)
    • 1983 Husqvarna workshop manual.pdf (29 pages) (I think this is the 1980-85 engine workshop manual)

    What I would like to see (if there is one) is the 200 odd page workshop manual for 1983. As the 1983 parts manual alone is anywhere between 92 pages and 192 pages depending on which version you get, I suspect what is for sale on ebay (which is described as owners manual, workshop manual and parts manual) is no different to what's listed above. If it is the full 200 page workshop manual, I'd be interested!

    Cheers
    Lucien
    White Husky, Dec 11, 2009
    #4

  5. Xcuvator Husqvarna
    Pro Class

    Location:
    Scholls Oregon
    Husqvarna Motorcycle:
    TE450,610 WB165,WR250 WR360 & XC430
    Other Motorcycles:
    yes
    I sure like the sounds of this. I have an 82 that I will be tearing into soon.
    A shop manual would would give me some more incentive to finally get going on it.
    Xcuvator, Dec 11, 2009
    #5

  6. bultokid Husqvarna
    AA Class

    Location:
    Houston, Tx
    Husqvarna Motorcycle:
    '84 250/500 '87 250/430 '18TC250
    Other Motorcycles:
    Bultaco, Fantic
    http://www.pastasoft.se/hva/goodstuff.htm

    I knew I had bookmarked somewhere. But as WhiteHusky said all of the manuals on there are not the true Workshop manual but it does have motor/tranny stuff. I am tempted to get the one off ebay but it's probably the same stuff.
    bultokid, Dec 12, 2009
    #6

  7. Husky37 Husqvarna
    AA Class

    Location:
    UK
    Husqvarna Motorcycle:
    84 CR500, 85 CR500, 89 TE 610
    Hi bultokid,

    I have masters for:-

    Owners Manual for Frame Numbers:

    CO 00001, WO 00001, XO 00001
    and
    CO 11000, WO 11000, XO 11000

    and a 1983 Parts Manual

    The above is original hard copy but if you want one then I can scan it in and make a PDF.

    Stu
    Husky37, Dec 13, 2009
    #7

  8. HuskyT Moderator

    Location:
    Corona, California
    Please scan and send the pdf of the owners manuals to me. Send me a PM when you have them ready!

    T
    HuskyT, Dec 13, 2009
    #8

  9. HuskyT Moderator

    Location:
    Corona, California
    HuskyT, Dec 13, 2009
    #9

  10. Husky37 Husqvarna
    AA Class

    Location:
    UK
    Husqvarna Motorcycle:
    84 CR500, 85 CR500, 89 TE 610
    Just brought my PC back from the dead.... just loading back software as and when needed.

    Will install scanning software and get those manuals done. Will PM when complete.

    Stu
    Husky37, Dec 15, 2009
    #10