1984 WR400 stock timing

i cant find the stock timing setting for this bike. anybody know?


all i could find was this is the workshop manual. but it says to look at the technical data sheet in the owners manual....

Must be the same as 400 wr 85/86.

2.2mm BTDC or 17 deg BTDC

hmmmmmm so my bike was at 22. could this be part of my issue (doesnt seem to have full top end power)???

its very possible. advancing timing tends to weaken top end and enhance bottom. either way if you really are at 22 thats not good

i beieve it is. i used a rod to tell when tdc was but was able to get it pretty accurate. id say within 1 degree.

back her off a tad....