1986 430 Auto Crankshaft

In need of 1986 430 auto crankshaft or any capatible unit

I don't know much about Auto's but I've had to source crankshafts for other Husky models from the 70's. If you haven't done so already, try contacting some of the folks selling vintage Husky parts and ask them if they have anyone they can recommend. In my experience I've had to buy a worn out crank from one source, newer stub shafts from another, a con-rod kit from another, and have another rebuild the crank with the parts I sourced. Google "vintage Husqvarna parts" and ask those guys if they know anyone who may have what you need, and go from there.

What is wrong with the crank shaft you now have? If you need a new con rod kit I have a couple of very lightly used ones I pulled from cranks that had bad stub shafts. The con rod kit part # is 161064201.

Marty

When I built my Auto, the only parts I re-used from the crank was the two cheeks. New stub shafts and a rod and pin kit.