1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 1995 WR 360 exhaust o-ring and washer size&materials?

Discussion in '2 Stroke' started by belogerer, Nov 13, 2012.

  1. belogerer Husqvarna
    C Class

    Husqvarna Motorcycle:
    WR 360
    Can anybody help me please with size and materials for the items #18, #26 and #30 from the attache picture?

    They are missing on my 1995 WR 360 :(

    Attached Files:

    belogerer, Nov 13, 2012
    #1

  2. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    I haven't used the stock unit in over 10 years but the key is the o-ring and plenty of red exhaust silicone to create a good seal...in other words you don't really need the washer ...then again one of the other guys with stock pipes on their 360's might be able to help you.

    PS. Halls, and most of the site sponsors, are pretty good in ordering your OEM parts.
    ohmygewd, Nov 14, 2012
    #2

  3. belogerer Husqvarna
    C Class

    Husqvarna Motorcycle:
    WR 360
    Thank you for the reply - I will measure the diameter of the exhaust and try to find a proper o-ring. I am from Romania so it is quite hard and expensive to order parts from USA...
    belogerer, Nov 14, 2012
    #3

  4. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    Athena in Italy might be cheaper for you?
    ohmygewd, Nov 15, 2012
    #4