Hi All I have a problem with my 610 which was solved late last year but has reared it's head again! Basically when going at speed the engine splutters and sometimes dies completely and I have to bump whilst rolling to get it going again. This can last a couple of minutes and then be ok again. If I stop and pull over wait a few minutes and then ride again it seems to be ok. My friend was convinced it's a fueling problem but I don't agree (see below) but I maybe wrong. Of interest it backfires a lot and there are flames coming out of exhuast when it's spluttering. When this happened last year my husky dealer traced it to a dodgy CDI (replaced) AND also a broken stator (apparently the coating can crack when the stator heats up and the winds can get damaged??). Anyway that was replaced as well with a re-con stator. At the same time he checked the valve clearances and cleaned the carb in a wave cleaner so everything seemed to be perfect. I have had about 3-4 hours of great riding with no issues but this re-occuring problem is doing my head in! I cannot possibly think what it can be, please can someone offer their advice? Thanks
