125-200cc 1999 CR125 Parts??

Hey guys i just bought a 1999 CR125, basically it needs a complete tear down and rebuild. I've found that here in Australia that parts are very hard to track down for this year model bike. I'm pretty confident that wiseco will be able to supply me with a full top and bottom end rebuild kit. the problem is i can't find a set of plastics for it, the set thats on the bike are the originals and are completely rooted. Ive contacted a few of the plastics manufacturers that i know like Acerbis and UFO but they don't make a kit for it.

Does anybody own this model bike? any information about this model bike is hard to find, so if you have any advice or know of any companies that i could use during the rebuild i could really use some help

This is my first euro bike i'm used to Yamaha's (I've owned 6 of them) so don't be too harsh with me haha.

the engine parts are pretty available from dealers
but,,,,,,,,
the plastic is another story
in their day Husqvarna was a player and as such aftermarket parts were available, when Cagiva acquired it the brand lost some of it's luster and as such sales
when sales diminish so does the aftermarket and general overstocking of parts so good luck
I currently have a 99 that shares plastic with yours and have been watching some interesting threads about changing to newer plastic that also is still available

are those threads on this site? would be interesting, could make it look a bit nicer too.

they are here but you will need to do some digging
as I recall he's an Aussie like you so its a local thang

http://www.cafehusky.com/threads/plastics-years-interchangeability-is-that-a-word.39986/#post-388599
here is one that mentions the frame and tank mods
as I recall it was Shawbagga that did one of the threads

thanks mate ill keep looking.

I too would like some fresh plastic for my 99.. Anyone ever consider a 3D printer or know someone with one. I wonder if the material used would be impact resistant and flexible

Hey guys I've been doing a lot of searching on the plastics issue for my 99 cr125 and have hopefully solved the issue without doing an expensive subframe/tank conversion, I have got in touch with a guy from www.dcvmx.com they sell vmx and rare plastics etc his name is Tom Claerhout, he told me he can make a duplicate of the old plastics with a mould, I am sending him my tank shrouds and side plates to duplicate for around AU$200. His email is dcplastic@yahoo.com they are in the USA I recommend dropping him a line considering all the two stroke plastics are the same and also new rear fenders are available on eBay and various shops online

So Tom at DCvmx has finished my 99 cr plastics and they're now available on his website guys they fit 95 to 99 all two strokes

Be awhile since i was last on here. Aza88 this is great news. Sorry to wake an old thread guys.

Sweet! Great stuff!