1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

1st short ride - 2010 TE250

Discussion in '4 Stroke' started by DougW, Dec 24, 2009.

  1. DougW Husqvarna
    AA Class

    Location:
    Santa Clarita, CA
    So I finally got to take the new bike for a 11 mile ride this afternoon around town. I rode it stock minus the fact I had pulled the throttle stop and Catalytic converter. It ran pretty good, no back fire no real hesitations and cruised right along. The idle was a bit ruff but I'm sure that is mostly from being new.

    Then I pulled the air canister and put the 50 tooth main gear on rode it again. The rpms as you would expect were higher some but it pulled better and still ran decent. I figure I will wait a bit more to remove the rest of the stuff and finish the power up kit. I just wanted to see what it would do.

    Doug
    DougW, Dec 24, 2009
    #1

  2. HuskyDude Moderator

    Location:
    BC, Canada
    Husqvarna Motorcycle:
    13/TR650
    Other Motorcycles:
    10/EC300, 76/TY175
    Awww the Very first ride....:thumbsup:
    HuskyDude, Dec 24, 2009
    #2

  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Congrats on the bike. :thumbsup:
    Motosportz, Dec 24, 2009
    #3

  4. mal5.1 Husqvarna
    C Class

    Location:
    NSW, Australia
    There's nothing the first ride on a new bike. All the magazines are raving about the TE250 down here in Aussie land.

    Cograts on the new bike.
    mal5.1, Dec 24, 2009
    #4

  5. john01 Husqvarna
    Pro Class

    Location:
    Powhatan VA
    Congrats on your new TE Doug.
    john01, Dec 24, 2009
    #5

  6. Benriding Husqvarna
    AA Class

    Location:
    Wisconsin
    So id the TE same frame, head angle, off set as the other 2010 250's
    Benriding, Dec 30, 2009
    #6