1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2 throttle cables?

Discussion in '4 Stroke' started by somdale, Oct 25, 2009.

  1. somdale Husqvarna
    AA Class

    Location:
    Southern Maryland
    Is it really necessary to have a push pull system?

    Was going to rempve the push cable just to see if I get a lighter throttle action.

    Dale

    06 TE-250
    somdale, Oct 25, 2009
    #1

  2. fury1 Husqvarna
    AA Class

    Location:
    ma.
    wouldnt do that,I have been told they use them on the four strokes as its possible to create enough vacuum to have the throttle remain open even if you release it
    fury1, Oct 25, 2009
    #2

  3. demi Husqvarna
    AA Class

    Location:
    Cheyenne, WYO
    Husqvarna Motorcycle:
    12 WR 300
    Other Motorcycles:
    '14 SH 500, 81 Gilera 125 C1, 17 KTM
    I wouldn't do it either....but, some have with no probs...
    demi, Oct 25, 2009
    #3

  4. ghte Husqvarna
    Pro Class

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    I did it for a while when one cable broke. It worked well enough but did lose a bit of sensitivity and was a concern going down steep hills as the throttle would seem to respond too quickly to wrist jolts and accelerate when not wanted. Much happier with both installed.
    ghte, Oct 25, 2009
    #4