2001 te 400 ignition troubles

Discussion in 'Older Single cams' started by dannydowell, May 14, 2011.

  1. dannydowell Husqvarna
    A Class

    Location:
    Missouri
    Husqvarna Motorcycle:
    2012 Husky TXC 511.
    Other Motorcycles:
    92 WXC 610 and a 2001 TE 400
    need to know if anyone knows which wires on the stator are for the pulse generator.
    dannydowell, May 14, 2011
    #1

  2. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    i don't know, but ignition problems on that bike would usually be loose magnets on flywheel.
    Norman Foley, May 15, 2011
    #2

  3. BILLF CH Sponsor

    Location:
    BMP Husqvarna, Salem, OR USA
    Husqvarna Motorcycle:
    92WXC350 /Lamson CR250/701 Vitpilen/
    Other Motorcycles:
    Triumph900 Scrambler 1200 HD Nightst
    They dont actually use a pulser,its a low speed set of coils and a hi speed set of coils.Like Norm said 99.9% of failures are the loose magnet pack.We did loose a few stators and had them rebuilt, but it must be pain because we cant get even the old rewind guys like Rickys or custom Rewind to touch one anymore.For $75 you can send us your ignition system and we will test it/diagnois wich component is bad.Otherwise its a Flywhel stator assy and CDI/coil assy purchase.billf.
    BILLF, May 16, 2011
    #3

  4. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    We switched the software we are using in late January of this year.. and that is what this 'Have you seen' forum is for. Tidbits about how to use the new forum, etc.

    I'll move this over to the Older Single Cams forum..
    Coffee, May 17, 2011
    #4

  5. dannydowell Husqvarna
    A Class

    Location:
    Missouri
    Husqvarna Motorcycle:
    2012 Husky TXC 511.
    Other Motorcycles:
    92 WXC 610 and a 2001 TE 400
    BILLF send me mailing info. or call 6602470049 need to visit. Danny.
    dannydowell, May 19, 2011
    #5

  6. dannydowell Husqvarna
    A Class

    Location:
    Missouri
    Husqvarna Motorcycle:
    2012 Husky TXC 511.
    Other Motorcycles:
    92 WXC 610 and a 2001 TE 400
    uptite has rephased the flywheel. stator looks spotless. call me if ya can. Danny 6602470049 I will tell what we tested and let me know what you can do.
    dannydowell, May 19, 2011
    #6