2001 TE 400 Tips

Discussion in 'Older Single cams' started by photoguy_43420, Feb 15, 2011.

  1. photoguy_43420 Husqvarna
    AA Class

    Location:
    Ohio
    Husqvarna Motorcycle:
    11 Husqvarna's from 1973-2001
    Other Motorcycles:
    73 Norton Commando 850
    I'm looking at 2001 TE 400, I have owned over 20 Hukys but not a 4 stroke. I wonder if anyone could tell me some items to check for. I'm kind like the idea that the frame is based off 86 single shock as I have two 87 430 CR that I have owned for over 20 years that I love to ride.

    Thanks,
    Guy
    photoguy_43420, Feb 15, 2011
    #1

  2. Eurofreak Husqvarna
    AA Class

    Location:
    Western NY
    Husqvarna Motorcycle:
    1986 TE 510, 1982 CR250, 2008 WR250
    Other Motorcycles:
    70's Triumph , Bultaco , Maico, etc
    the motor is basic- If the top end is noisy that may be the cam chain.
    check the cam chain wear if possible-remove the tension on the tensioner spring and then remove the assembly to see how much travel is left on the tensioner. I had the cam chain replaced, and the magnets on the flywheel came unglued. They have to be in the right spot to be re-glued-many times easier to get a new flywheel. the bike just won't run.
    It's a solid motor in a decent frame- carb needs to be dialed in correctly to start hot properly. I would kick and kick...
    Eurofreak, Feb 28, 2011
    #2