1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 2001 WR250 Part Compatibility

Discussion in '2 Stroke' started by Lucas Zecker, May 23, 2016.

  1. Lucas Zecker Husqvarna

    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    Honda CR125
    I'm looking at trading my current 03 Honda CR125 for an 01 Husky WR250. I'm a little worried after looking for parts though. I can't seem to find a single kit for the 01 specifically, but I'm sure it uses the same plastics as another year, right? What can anyone tell me about this? Thanks
    Lucas Zecker, May 23, 2016
    #1

  2. Miezie666 Husqvarna
    Pro Class

    Location:
    Germany
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2x YZ 125, 1x YZ250 2005, XT600 2KF
    Plastic kits from 2000- on are easily to get.
    I also ride a 2000 WR250- parts are no problem, keep away from pre 00 bikes- as the plastics are hard to get (if new- they are in questionable quality), engine parts before 98 are harder to get by...
    Miezie666, May 24, 2016
    #2

  3. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    I thought to 00-04 was the same plastic :confused:
    2premo, May 24, 2016
    #3
    Norman Foley likes this.

  4. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    It is.
    Norman Foley, May 24, 2016
    #4

  5. Lucas Zecker Husqvarna

    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    Honda CR125
    Great. Thanks for the help guys
    Lucas Zecker, May 26, 2016
    #5

  6. NicaJohn Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2004 cr125 02 cr135 02 wr144
    Other Motorcycles:
    Kdx200,2015 beta 430rr
    Does anyone know of source for plastic kits for 04 cr125? Seems I can only get pieces
    NicaJohn, Jun 3, 2016
    #6

  7. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    Pieces only, side panels and tank shrouds do come in pairs.
    rancher1, Jun 3, 2016
    #7

  8. NicaJohn Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2004 cr125 02 cr135 02 wr144
    Other Motorcycles:
    Kdx200,2015 beta 430rr
    Thanks. I ordered pairs of sides, shrouds and lower shrouds all from same place. Wanted to grab what I could. Also found set of black for that year but in UK and after shipping almost $400!
    NicaJohn, Jun 3, 2016
    #8

  9. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Ahh but they are available ;)
    juicypips, Jun 3, 2016
    #9

  10. Lucas Zecker Husqvarna

    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    Honda CR125
    does anyone know if you can put a 2005 front fender with the black support piece on a 2001 bike?
    Lucas Zecker, Jun 29, 2016
    #10

  11. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    Yes you can, the only difference is the bolts and bushings are longer to accommodate the fender brace added.
    rancher1, Jun 30, 2016
    #11