1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc 2002 WR360 jetting

Discussion in '2 Stroke' started by pointynose, Mar 16, 2009.

  1. pointynose Husqvarna
    B Class

    Location:
    vermont
    any of you guys out there have any recommendations on the carb setup for riding at 500-1200 ft above sea level? my new 360 runs fat mid range and up.
    thanks-Matt:excuseme:
    pointynose, Mar 16, 2009
    #1

  2. colemanapp Husqvarna
    AA Class

    Location:
    St. Louis, MO
    This is from an old post and is what I've been running for a couple years. Works great.


    02 WR 360, gnarly pipe/turbine core II. This jetting is from Jay Hall at Halls Husky. Never fouls plugs and runs clean throughout all ranges.

    My altitude (St. Louis, MO) 500-1000 ft.
    420 main, 30 pilot, 4.0 slide, 64 needle in center position, air screw out 1 turn.

    Moab Utah 4000-7500 ft.
    380 main, 25 pilot, with needle in 2nd groove from top
    colemanapp, Mar 16, 2009
    #2