125-200cc 2007 CR 125

Who makes parts for these awesome bikes and where do I get them?

need to be a little more specific

Well I can't find much of anything for it.

Plenty of aftermarket piston kits, bearings, plastics etc.

Hard parts try Halls, Bills & several euro suppliers.

Wat u chasing mate?

Your location as in country would help get you to a good spot since shipping can be a killer.

G'day, what's Halls and Bills? I'm after good footpegs or even a set of the stock ones as I sold my Husky to a mate but got it back with footpegs off another bike and a stock or good aftermarket shift lever.

Mandurah, WA

Tyres for bikes(Perth husky) in vic park should be able to get wateva u need provided it's not on back order. Bunbury city motorcycles(bunbury dealer) too. Iv bought a few things from em last 6 months(gasket kit, orings, chain slider cup washers). Sheila there is very helpful. They jus look up parts fiche, get part number n order from Perth warehouse. R&d husky over east is pretty good too. Best to just pick up the phone n ring em direct mate

Otherwise it's over to the US or Europe for sumthn in particular they mitn be able to get in a decent timeframe here.

Sorry missed the first post

Halls cycles n bills motorcycles plus r 2 good dealers in the US of A that can get almost anythin u nd at reasonable prices. Site sponsors too! Wish we had dealers here like them!!!

As for shifter n pegs, ebay is your friend. I'm runnin an rfx shifter which set me back $40 del from UK.
Rfx, driven, moose/msr(I think) n plenty other brands too that make em. Same engine since 98(shift shaft n design same?) so pretty broad selection. Same deal with pegs mate ebay search will bring up plenty. I'm gonna try sum alloy jobbies from savage mx wen I got sum spare $

Motosportz husqvarna(motosportz mike on here) had sum stock looking steel replacement pegs but dunno wat postage from US cost. Fastway make nice ones too but exy!

I bought my pegs off Ebay

i googled
2007 HUSQVARNA 125 FOOTPEGS
interestingly, i came up with a few leads...one of the first ones linked back here to a somewhat informative thread
http://www.cafehusky.com/threads/husqvarna-wr-125-01-footpegs.39390/

not to be a smartass, but are you just being lazy? i mean the internet is at your fingertips. try searching this site using the searchbox at the top right. the "advanced search" option works well, and if theres a question about your husky its very possible its been asked and answered here.

I am guessing WA is Western Australia, not Washington state, US ?

I like your geographical knowledge rancher! He up the road from me bout an hour

Thanks mate, I will hit them up. I used to buy parts from Stefan at R&D Husky back when the bike was quite new but last time I spoke to him he didn't have what I needed.

Yeah, Western Australia!

The only ones I've seen on Ebay are cheap Chinese ones.

Cool, thanks for the info mate. I didn't know the shift shaft was the same as the '98.

Got a 2002 cr125 piston, cylinder, powervalves,head,clutch cover,centre case and misc stuff but not what your after, sold my 125/144 years ago.

Basic engine same since then different cylinder ports n other bits n pieces. I know the countershaft is the same but double check the shifter shaft to be sure. Can't imagine it would of changed but could hav!