1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 2007 Husqvarna Wr 125 No Lights Working

Discussion in '2 Stroke' started by IsacH, Oct 19, 2017.

?

No lights working

lights 0 vote(s) 0.0%
elektrical 0 vote(s) 0.0%
Multiple votes are allowed.

  1. IsacH Husqvarna

    Husqvarna Motorcycle:
    2007 Husqvarna WR 125
    IMG_0622.JPG Hello! I have a 2007 Husqvarna WR 125 and i have no lights working. Can anyone post a picture of the cables behind the light is connected too?
    IsacH, Oct 19, 2017
    #1

  2. loafer666 Husqvarna
    C Class

    Location:
    United Kingdom
    Husqvarna Motorcycle:
    WR 125
    Half you checked the bulbs?
    loafer666, Nov 29, 2017
    #2

  3. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Power wire should come out of the regulator, go to the switch, then split to both head and tail light. Ground wire should go to both light grounds and also to spot on bare metal, or ground to a bolt that goes into the frame. I didn't have lights on my 2013, but that is how I wired mine when I added lights to it. You can make sure that power is coming out of the regulator with a test light or meter, then if that is good, check all the wiring and the bulbs, and current coming out of the switch.
    Dirtdame, Nov 29, 2017
    #3

  4. Bill502 Husqvarna
    AA Class

    Location:
    Upstate NY
    Husqvarna Motorcycle:
    2007 WR167 1978 CR250 1938 sw maus
    Other Motorcycles:
    1970 Triumph T100C 1973 Honda TL125
    This is how my 2007 WR167 is wired. Simple Wiring Diagram.jpg
    Bill502, Nov 30, 2017
    #4