1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st 2007 linkage bearings?

Discussion in '2 Stroke' started by 2stroked, Aug 28, 2011.

  1. 2stroked Husqvarna
    A Class

    Location:
    B.C. Canada
    All balls has them but they don't seem to last, Pivot works only lists for a 2004, from what I know they should be the same, is this correct? Thanks for any input!
    2stroked, Aug 28, 2011
    #1

  2. endurokids Husqvarna
    AA Class

    Location:
    Wisconsin
    Husqvarna Motorcycle:
    250WRX, CR167, 83 430WR, TE449
    Other Motorcycles:
    75 Guzzi 850T
    IDK, but I replaced both of our 07 125's with the stock units.
    endurokids, Aug 29, 2011
    #2

  3. 2stroked Husqvarna
    A Class

    Location:
    B.C. Canada
    Do you mean with the OEM Husky stuff? The All Balls stuff seems to not last, there are also less bearings in the All Balls stuff
    2stroked, Aug 29, 2011
    #3

  4. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    The pivot works should be the same stuff as all balls. You can always get the numbers off of the bearings and just order them from a local bearing house.
    rancher1, Aug 30, 2011
    #4

  5. pahusky Husqvarna
    Pro Class

    Location:
    Hummelstown, Pa
    Husqvarna Motorcycle:
    '14 TC250
    Other Motorcycles:
    '12 250XC '09 1200GSA KLR650
    pahusky, Aug 30, 2011
    #5

  6. gem Husqvarna
    A Class

    Location:
    British Columbia
    The linkage bearings from 2004 are the same only the shock bearing is different. You can get the bearings from any bearing supply its the collars or inner races that are hard to get. You can PM me at the BMMC site and I can get the INA bearing numbers for you.

    Grant
    gem, Aug 30, 2011
    #6