Hi all, if anyone has info on a good place to buy clutch friction plates for my 2007 te510, please post the info. I am having a hard time finding plates for the 2007 model year. And the 2008 plates are smaller , i have already tried them, big waste of time and money on my part. Even the part number might help me turn up sources. Thanks in advance riders. Wayne.
I'm pretty sure all the years use the same friction plates, maybe you got the wrong plates the first time around. I've got a used Rekluse out of an '07 TE and new clutch plates off of ebay for an '08 all stuck in my '05 TE. When looking up aftermarket clutches, they all seem to be the same for 1999-through 2010. My '05 and '09 have the same autoclutches in them.
yea , its a little frustrating, i was sure at least 06-09 were the same. going to give it a try to contact seller and see if i got sent the wrong plates. thanks.
Need at ask again. Hi all, i never got any help from the place i received the last non fitting plates from, so i am back to ask here again. I have heard so many things like some Honda plates mic out the same, but no real info. If you can help me out with a part number for replacement fiber plates for a 2007 TE510, please respond. Surely someone has replaced their clutch with aftermarket parts. Thanks in advance.
I just checked Barnett's website and they seem to list clutch plates only for an 08. Maybe that is when they started to make plates for late models. You could call or e-mail them if you are curious about them.
Yep, did that and they did not support the 07. I took a chance and ordered the 08 listing. For the record the 08 plates sent from barnetts are the ones that did not fit.
The part number is 8000 A9764 and you are right, it's different than '06 down and '08 up, it seems as if the '07 is some sort of freek. Halls has parts look up here - https://www.halls-cycles.com/Catalog/PDF/Husqvarna .PDFs/2008/2008_Husq_DOHC_parts_Catalogo.pdf
Thank you Thanks, was beginning to think i had lost my mind, could not find a listing anywhere and knew the 301-35-10012 was not the right fitment. Thanks again for confirming my findings.
I still dont understand if the '07 is different how come things like a Rekluse fit for 99-10? The baskets have to be the same, you would think the discs would be the same but I guess not.
Yea me too. I don't understand ether. I have always been able to pick from at least a couple of kits or plate manufactures to replace a clutch. I have done many clutches on friends bikes, atvs and my machines. The inside diameter was just a little smaller on the replacement plates, but would not fit on the basket. I still wounder if i got sent the wrong plates, but getting a refund was hard enough, getting support was going to be out of the question. I still wounder if the old HPK-39A or new 301-35-10012 is still the right size. I am considering a reckluse but at this point wounder if i would have a fitment problem with that. I would really like to here from more owners of a 2007 te510 model. Some online suppliers offer single plates for sale, i might just order one 301-35-10012 to settle this once and for all. If i am going to pay close to 200.00 for oem plates including shipping, i might just suck it up and get what i would be happy with the Reckluse. Buy the way unless i am reading the parts list wrong i think the husky part number is 8A00 A0611, not 8000 A9764 as posted last. Please excuse me if for some reason i still have it wrong, but thats what i am seeing on the 2007 pdf. Surly someone has ran into this problem before, would really like to hear from you. Thanks , Wayne.
According to the set Dennis Kirk has for a small $246 they fit all these bikes. •Part 383885 fits the following machines: •2006 Aprilia RXV 450 •2007 Aprilia RXV 450 •2008 Aprilia RXV 450 •2009 Aprilia RXV 450 •2006 Aprilia RXV 550 •2007 Aprilia RXV 550 •2008 Aprilia RXV 550 •2009 Aprilia RXV 550 •2006 Aprilia SXV 450 •2007 Aprilia SXV 450 •2008 Aprilia SXV 450 •2009 Aprilia SXV 450 •2006 Aprilia SXV 550 •2007 Aprilia SXV 550 •2008 Aprilia SXV 550 •2009 Aprilia SXV 550 •2002 Honda CRF450R •2003 Honda CRF450R •2004 Honda CRF450R •2005 Honda CRF450R •2006 Honda CRF450R •2007 Honda CRF450R •2008 Honda CRF450R •2005 Honda CRF450X •2006 Honda CRF450X •2007 Honda CRF450X •2008 Honda CRF450X •2009 Honda CRF450X •2009 Husqvarna SM450R •2005 Husqvarna SM510R •2006 Husqvarna SM510R •2007 Husqvarna SM510R •2008 Husqvarna SM510R •2009 Husqvarna SM510R •2009 Husqvarna SMR 450RR •2005 Husqvarna TC450 •2006 Husqvarna TC450 •2007 Husqvarna TC450 •2008 Husqvarna TC450 •2009 Husqvarna TC450 •2005 Husqvarna TC510 •2006 Husqvarna TC510 •2007 Husqvarna TC510 •2008 Husqvarna TC510 •2009 Husqvarna TC510 •2005 Husqvarna TE450 •2006 Husqvarna TE450 •2007 Husqvarna TE450 •2008 Husqvarna TE450 •2009 Husqvarna TE450 •2005 Husqvarna TE510 •2006 Husqvarna TE510 •2007 Husqvarna TE510 •2008 Husqvarna TE510 •2009 Husqvarna TE510 •2006 Kawasaki KX450F •2007 Kawasaki KX450F •2008 Kawasaki KX450F •2009 Kawasaki KX450F
OK, now that's some real info. Know we know that the plates in question are not unique to the husky. I would have really been surprised outherwise. Why would a manufacture have something as simple as clutch plates made for an everyday bike. I will work with this info and post my findings, like bet you can get plates for a honda much less than a Aprilia. Thanks for all your help, i did not even think to look at DK.
Anyone been able to get some further clarification regarding the clutch discs in the pre 08 bikes to the post 08 bikes? Denis Kirk lists the same Adige Racing part number for both the 06 and the 08, however Denis Kirk does not list the Pro X 2008 versions as fitting in the 2006. Further, the husky part numbers are different for the 06 models compared to the 08.
