2008 Te450 electronic questions.

Hello! I bought my te 450 a couple of weeks ago. The previous owner had somekind of racing electronic system installed. Now i'm trying to change it to the original system. But I have run into som problems.

- Do the engine have to run for lights and indicators to function ?
- Where is the flasher relay? And what does it look like?
- I have 3 connections that i havent found.

In the front, might this one be for setting up the efi?



In the back. Is it possible that the first can be for the flasher relay?



Dont know what this could be for..

Engine has to run for lights and indicators to work. Flasher unit should be near battery on LHS, should be black square unit.
First Pic is where you hook up to ECM, 2nd pic where on bike is it and what colour are the wires last pic, if it is above the engine it is the lambda sensor connection, it is part of the power up kit, leave it alone. If it is on the right side of the battery it is only used on the SMR model. Basically it kills the engine when you fall off.

The engine runs for full headlights, there is a small 5 watt running light bulb I believe though when you turn the key on. I think the rear tail light comes on with the key.

Yes the first pic is for the Ibeat and should be behind the front headlight. The Second one should have been in at the airbox? That one looks like it is for the flasher. It is a small black box the size of a small box of matches. If you look on Hall's website you can find the parts manual and get a better idea what it looks like. The third one is your Lambda sensor I believe, that should have been under the gas tank.

I have one for the lambda. But I got the electronic problems sorted. Now it's the o-ring for the clutch that is causing problems.

Thanks for the help!