1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 2008 WR250 REAR MASTER CYLINDER REBUILD KIT

Discussion in '2 Stroke' started by RKHOP84, Sep 10, 2013.

  1. RKHOP84 Husqvarna
    A Class

    Location:
    WESTBYGODVIRGINIA
    Husqvarna Motorcycle:
    2008 WR250 2013 TE511
    Looking if anybody knows of a rebuild kit, or if any one knows any cross references with ktm. I've searched around and can't seem to come up with anything. All help is greatly appreciated.
    RKHOP84, Sep 10, 2013
    #1

  2. Jon Husqvarna
    AA Class

    Location:
    Wisconsin
    Husqvarna Motorcycle:
    14 TXC 310R
    I got one from Halls for my 09 te250 im pretty sure there probably the same. But do not have the part number off hand.
    Jon, Sep 10, 2013
    #2

  3. RKHOP84 Husqvarna
    A Class

    Location:
    WESTBYGODVIRGINIA
    Husqvarna Motorcycle:
    2008 WR250 2013 TE511
    No they are different
    RKHOP84, Sep 10, 2013
    #3

  4. ajaxauto Husqvarna
    Pro Class

    I just purchased a new one from Halls it was not that much
    BUT I also took the original one apart cleaned it and re tried it It has been working great now for 6 months and the new one is still sitting on the shelf
    ajaxauto, Sep 10, 2013
    #4

  5. RKHOP84 Husqvarna
    A Class

    Location:
    WESTBYGODVIRGINIA
    Husqvarna Motorcycle:
    2008 WR250 2013 TE511
    ok thanks
    RKHOP84, Sep 10, 2013
    #5

  6. Eaglefreek Husqvarna
    Pro Class

    Location:
    Fayetteville,TN
    Husqvarna Motorcycle:
    11 WR300
    There is a another thread somewhere here that discusses this. You can get just the seals from KTM. Part number 54813064200.
    Eaglefreek, Sep 10, 2013
    #6

  7. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I have been struggling with this same issue. Been having some rear brake issues. I ordered some Bellow seals for the rear master for the KTM and they work for the side the cases pressure to make the brake work but the ones to seal oil from the outside world are different and I have not found a source for those. the "kits" with everything from husky seem near impossible to get which is odd as many use the same one.

    this might work but it is unclear what seals are included and if it is all the seals.

    http://www.ebay.com/itm/KTM-5481306...Parts_Accessories&vxp=mtr&hash=item1c2fbb41ba
    Motosportz, Sep 10, 2013
    #7

  8. RKHOP84 Husqvarna
    A Class

    Location:
    WESTBYGODVIRGINIA
    Husqvarna Motorcycle:
    2008 WR250 2013 TE511
    not the right one either. had one on the shelf and tried it. looks close but where the push rod sets into the "cup" on the bottom of the bellows it's smaller on the ktm kit. thanks for suggestion though
    RKHOP84, Sep 10, 2013
    #8

  9. Rob578 Husqvarna
    AA Class

    Location:
    Atlanta GA was CA
    Husqvarna Motorcycle:
    Beta 300RR Beta 500RS TE 630
    Other Motorcycles:
    Honda 919 sold FJR1300 sold
    Same problem the 54813061200 will not work either
    Rob578, Oct 1, 2013
    #9