2009 TE310 bar size? 7/8" or 1 1/8"?

I don't have my TE310 yet and I'm trying to order hand guards but don't know what size the bars are? are the stock bars 7/8" or 1 1/8"?

they are 1 and 1/8 inch.dan

thank you

Order mounts for a Magura bars if possible.

what is the diff between 'big' bars and 'magura' style?
so get this syle here?;http://www.rockymountainatvmc.com/p...dlebars-Control&webCatId=12&prodFamilyId=9542
and do not get this style, correct?;http://www.rockymountainatvmc.com/p...dlebars-Control&webCatId=12&prodFamilyId=9546

I had to get the 1 1/8 cycra u-clamp mounts. I tired some clamps that I already had that were similar to the Tusk clamps and the cables were in the way. The u-clamp mounts cleared the cables.


http://www.cyclebuy.com/shopping/cycra/cycra_hguard.htm#U-Clamp

I agree with Rocknroll about getting more clearance. Last weekend my left guard rotated up when I crashed and snapped my clutch line. I would recommend the U-clamps, Triple mount clamps, center reach, or the awesome HDB guards. Some mounts are hinged to allow for mounting on the transition area around the bend where it gets smaller.

the Enduro Engineering Evolution (Magura) style is looking like the way I'll go. Good choice?