1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2010 250 valve shim size?

Discussion in '4 Stroke' started by krieg, Apr 21, 2010.

  1. krieg Husqvarna
    Pro Class

    Location:
    Matthews, NC
    Husqvarna Motorcycle:
    Many in the past
    Other Motorcycles:
    '12 Triumph Scrambler
    Anyone know if the 2010 motor uses the same diameter shim as the old motor? :excuseme: I've had the cover off, but haven't had to shim yet. Just wondering.
    krieg, Apr 21, 2010
    #1

  2. raisrx251 Husqvarna
    AA Class

    Location:
    Virginia
    From what I understand it is the same size as a Honda CRF 250 so they are different. Are yours out of spec yet?
    raisrx251, Apr 21, 2010
    #2

  3. krieg Husqvarna
    Pro Class

    Location:
    Matthews, NC
    Husqvarna Motorcycle:
    Many in the past
    Other Motorcycles:
    '12 Triumph Scrambler
    Mine are still in spec but getting tighter. I was just trying to prep for the inevitable.
    krieg, Apr 21, 2010
    #3

  4. MotoXotica Husqvarna
    AA Class

    Location:
    Vacaville
    what raisrx said.dan
    MotoXotica, Apr 21, 2010
    #4

  5. snoplw Husqvarna
    AA Class

    Location:
    Moorhead, MN
    rasirx 251 is correct I have had mine out not for inspection but do to some complete head adjustment made by eric gorr and they are the same as I believe most jap 250f
    snoplw, Apr 23, 2010
    #5

  6. aethelred Husqvarna
    AA Class

    Location:
    UK
    Which is?
    aethelred, Apr 24, 2010
    #6

  7. jmetteer Husqvarna
    Pro Class

    Location:
    Woodland, WA
    Husqvarna Motorcycle:
    TXC300 CR125 CR144
    Other Motorcycles:
    WR250F, TRANSALP
    7.48mm...

    Later,
    jmetteer, Apr 26, 2010
    #7
    Phoenix likes this.

  8. aethelred Husqvarna
    AA Class

    Location:
    UK
    Taa!

    I wonder what the shim thickness range is for standard bike?
    aethelred, Apr 26, 2010
    #8