2010 510smr Daily Rider

Just got a 2010 510smr Love this bike
gonna do a few mods to make it what i want,
here is a shot when i brought it home.

Then did a exhaust mod,

Opened up the cans Just removed the cats and the end silencer sounds sweet
Then added my air fuel mixture gauge and a GPS

And now for a body change new plastic from Husqvarna

Ordered some new graphics from the UK not here yet
The only thing more will need to be done is bring the air fuel ratio in line and we should
be good to go.
680 miles and two oil changes so far the only repair was fuel pump slipped up, had to
tie it back down other than that perfect, valves so far right on.

Pretty



Lookin good! Got any plans for graphics?

I ordered a version of this one


Getting Closer Blacked out exhaust and swing arm
waiting for graphics from UK



I like that. Powder coat on the swingarm and ceramic on the exhaust? Or high temp powder on the exhaust?

How does your Air/fuel gauge work? Is it hooked up to a probe in the throttle body or something?

It is a innovate motor sport LC-1 wide band O2 sensor that screw's into
oxygen sensor bung where the original sensor went on the mid pipe
look up innovate motor sports LC-1 it will tell you all about it
we have been using this unit for about 4 years to set up carbs and tweak the F/I

Here is a shot of the LC-1 read out to give you a idea

curious about the afr i went to the site but im not to educated in the tuning dept... what exactly can i do with this item if i just use the stock ecu no pcv vortex auto tune etc.? comparable to IBEAT? also which version are you using? the 199 version or the 329 version didnt know what the dif is... i have an 08 smr 450 thanks!

Tech 3,

When you reply to someone's quote, make sure you reply after their quote, not in it. That way everyone knows what's goin on

also did you purchase the 300 dollar one or the 199 one? thanks!

JR sorry about the post in the quote

B_M_F WE got ours a while ago but it would be the $199.00 one
GO to E Bay they are on there for $150.00 and up
If you need any help let me know

I always wanted a 2010 SM 450/510R after seeing this one. I GOTTA GET ONE OF THESE!

Have a good day,
Guscycle

thats a 530r euro model you can get a 510rr or 450rr but not titled for streets.
thanks i will order one asap im only getting 40 miles per stock tank on my 08 450 with pu kit any ideas?

No prob man just helping out.


Husky made RR models 2006-09. '06-07 were the early generations and only a 450. '08-09 was the new generation with the 530 only available in '09. This was a worldwide thing... and there wasn't ever a 510RR. The one above is an '08 450. In 09, the RR's had white graphics. I kinda dig the black '08 graphics a bit mire than the white ones. Hope that clears things up I sure wouldn't mind a 450RR. A while back here in the states there were a few leftover 450 and 530RR's that came out of no where and sold for cheap. $8,000/$8,500 cheap.. I sure wish I had taken the chance to get one..

B_M_F when you get the AFR gage you will be able to tell in what areas
you might be running rich, you can lean out those rich area's for more MPG
I did a 170 mile ride on my SMR the other day and i noticed that there were
definitely spots that could be leaned out. I also have the PU kit I can go about
60 miles be four i really need to find gas i run completely out at around 70 miles
it happened during the 170 mile ride, my fuel light comes on at around 50 miles
and it is best to start looking at that point.

AND YES THAT RR IS SUPER SWEET I really like the black

...stop it , you're killing me !

Your tellin me!

What is the ideal A/F ratio for power?

13.2 -13.4

So far mine seems to make the most power around the 12.9 to 13.2 range
but thats a guess (BUTT) Dyno, The bike just turned over 1000 miles
gonna try to do some dyno runs next week and i will find out

Does any one know where you can get this plastic or the graphics
or would would you have to have them made
I like it better than the white my self

i think a vinyl guy could do it up pretty cheap its just the side # plates and the rad shrouds.

What fuel management are you using tech3?

B_M_F I found the plastic and graphics
as far as fuel management i will probably go with a PCV