1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 2010 Cr150 winter jetting?

Discussion in '2 Stroke' started by Treesmacker, Nov 1, 2012.

  1. Treesmacker Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2010 CR150 "Woods set-up"
    Other Motorcycles:
    YZ125
    Just picked up a CR150 w/ Fatty & stock silencer it was jetted MJ 450 PJ 45 Needle 6DEY15-74
    clip #3 with a #4 slide. 32:1 non-oxy 92 octane

    Any suggestions for 1000ft elevation and 40-45°F???
    My son wants to try it this weekend before the snow flys!
    Thanks
    Bob in MN
    Treesmacker, Nov 1, 2012
    #1

  2. Treesmacker Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2010 CR150 "Woods set-up"
    Other Motorcycles:
    YZ125
    We are riding tomorrow and it's going to be 40°F so I richened up
    the main to a 480 and moved the needle clip to #4 just to be safe.
    Treesmacker, Nov 2, 2012
    #2

  3. Zomby woof Husqvarna
    Pro Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    2011 CR 150
    I'll be riding in the same temps next week and won't make any changes. Stock should be fine.
    Zomby woof, Nov 3, 2012
    #3

  4. Treesmacker Husqvarna
    AA Class

    Husqvarna Motorcycle:
    2010 CR150 "Woods set-up"
    Other Motorcycles:
    YZ125
    I swapped out the 480 main to a 460 today and it worked pretty well.
    This little Husky sure rips! My son had a blast riding it.
    Treesmacker, Nov 3, 2012
    #4