1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2010 Husky TE250 Brake Light is Always On. Pissing Me Off.

Discussion in '4 Stroke' started by 1203cc, Nov 16, 2020.

  1. 1203cc Husqvarna
    AA Class

    Location:
    Ontario
    Husqvarna Motorcycle:
    2010 TE250
    so my TE250 has the brake light on all the time. The micro switch on the front brake lever is working correctly but I'm not sure the rear tail light switch is functioning. I took the switch off the rear brake master cylinder and hit it with brake cleaner and air. I can depress the internal pressure switch with the flat end of a drill bit so I think that is working but can't really tell. Really not sure how to diagnose this without just buying another rear brake switch, which of course is a phone call to Hall's.
    1203cc, Nov 16, 2020
    #1

  2. JonXX Administrator

    Location:
    Bill's Motorcycles Plus
    Husqvarna Motorcycle:
    360CR 360WR SM610 TC450 TXC250 TC250
    Other Motorcycles:
    Hondas, Harleys, Yammys & a squid
    Unplug each switch and test them separately, use a continuity tester if you want to get extra-fancy.

    Also - most often we see people put the incorrect front brake lever on, and while the switch functions properly, the lever doesn't contact the switch to open the circuit and deactivate the light. Just something to double-check.
    JonXX, Nov 18, 2020
    #2

  3. funmachines Husqvarna
    AA Class

    Location:
    Bay Area
    Husqvarna Motorcycle:
    2012 TE310
    Other Motorcycles:
    Husa FE570, Beta trials, CDale 440
    A worn through wiring harness could do it too.
    funmachines, Dec 12, 2020
    #3