1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

2010 TE250 starting problem

Discussion in '4 Stroke' started by P-A Calmhede, Jun 11, 2020.

  1. P-A Calmhede Husqvarna
    AA Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    TR650 ,FE350,Silverpil,Svartqvarna
    Hi! I have a strange problem. The battery is fully loaded and after I have driven and stops the bike and then tries to start it, the starting ingine doesn't have the power to turn around the engine. I checked the battery and it still has full power. Then if I wait for 20 min and tries agin the bike starts with ease.
    What could be the problem? Hopefully anyone has had the same problem and have a solution?
    Best Regards P-A
    P-A Calmhede, Jun 11, 2020
    #1
    tfpc likes this.

  2. keg235 Husqvarna
    A Class

    Location:
    Alberta Canada
    Husqvarna Motorcycle:
    Husqvarna TE250
    I have a different starting problem, but I have heard of this. Is it also extremely hard to kick start?
    keg235, Jun 24, 2020
    #2

  3. P-A Calmhede Husqvarna
    AA Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    TR650 ,FE350,Silverpil,Svartqvarna
    Hi Keg235!
    Yes, it is very hard to kick start the bike. Just have to wait for 20 min and everything is alright. Are going to check the starter motor if the heat on it has something to do with it.
    P-A Calmhede, Jun 24, 2020
    #3

  4. keg235 Husqvarna
    A Class

    Location:
    Alberta Canada
    Husqvarna Motorcycle:
    Husqvarna TE250
    keg235, Jun 25, 2020
    #4

  5. P-A Calmhede Husqvarna
    AA Class

    Location:
    Sweden
    Husqvarna Motorcycle:
    TR650 ,FE350,Silverpil,Svartqvarna
    Thanks! I will check this :)
    P-A Calmhede, Jun 25, 2020
    #5

  6. tfpc Husqvarna
    C Class

    Husqvarna Motorcycle:
    te250
    How did you go with this, wondering whether it was a stripped ring gear?
    tfpc, Dec 5, 2020
    #6