2010 Te510 Electric Starter Issues/kickstand

Just bought a 2010 te 510. The electric start doesn’t work. I’m looking for a schematic for it to start. One thing I found just by chance I noticed that the clutch micro switch wires were disconnected/broken off so I tried bypassing it but didn’t work, but the one wire touched the handle bar grounded and the electric starter would work. Haven’t checked any wires over yet or anything due to my cheapi home multi meter dying and not having a schematic yet. Also I need a kickstand one of the riv-nuts is gone. One is spinning on the bolt and one in still there in goodish shape, upon further research I found that the that’s not the proper mounting spot, should I get those holes fixed and welded shut? . I’ll attach a picture. Looking for options on what route to go.

Thank you,

Mitch

The kickstand should mount to the frame. You could just silicone some plugs in the swing arm. You should be able to connect the 2 switch wires to bypass the clutch switch.