1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc 2010 WR/CR125 triple offset?

Discussion in '2 Stroke' started by robj, Mar 14, 2013.

  1. robj Husqvarna
    AA Class

    Location:
    NZ
    Husqvarna Motorcycle:
    2001 CR125
    Other Motorcycles:
    KX/KDX200 hybrid
    Just wondering what the offsets are on the 2010 WR's and CR's respectively. From memory the WR's were 15mm and CR's were 18mm (2000 - 2005). Did they change this with the new frame layout? Thanks for any info.
    robj, Mar 14, 2013
    #1

  2. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    I think they're about 25mm, if I remember right.
    MOTORHEAD, Mar 14, 2013
    #2

  3. dan s Husqvarna
    A Class

    Location:
    united states N.J
    Husqvarna Motorcycle:
    2013 wr 250 A-Class
    Are you going to try a different offset? I was thinking about this a lot lately. I see Juha Salminen has an offset triple clamp.
    dan s, Mar 15, 2013
    #3

  4. robj Husqvarna
    AA Class

    Location:
    NZ
    Husqvarna Motorcycle:
    2001 CR125
    Other Motorcycles:
    KX/KDX200 hybrid
    No I have a different set of forks which I might try out (see my other post on dinged forks:eek: ) and I'm trying to match the triple offset to the original. I measured it today and the offset for the 2010 WR (oem) is 18mm.
    robj, Mar 16, 2013
    #4