125-200cc 2010 wr150 with 36mm lectron fmf fatty question

I have a few questions, I recently installed my lectron carb on my wr and it runs great and hauls the mail. I have just ordered the fmf fatty pipe for it and will use it with the stock silencer. Any-body using this combo? Wondering what the difference will be compared to the stock pipe power-wise. Different jetting requirements? Thanks in advance for any input!

I would be surprised if you need to make any jetting changes to the Lectron. The pipe should give you better bottom/mid than the stock pipe.

You almost never need to alter your jetting because of a pipe. Wally is right. More bottom/mid, with no loss on top.

I think you will like it a lot and it will be good to hear your thoughts. I felt more of a mid range increase. (Also top end but that was possibly due to playing with the power valve.) I was running it with the standard big 08 muffler. Swapped to the turbine core fmf and like the original about the same. If yours is a small muffler it can be better to run the bigger muffler IMO.

Works good. Not rejet needed.

Got the fatty installed! Anxious to try it out and will post a ride report.!Pics to follow.

Thanks Kelly, I am usually not a fan of putting stickers on my bikes but I think it looks ok. I like the color on your bike as well, I think some blue rims would really look nice on your bike(any tm or husabergs in your area?)

Good job your not a fan of stickers as next time you take a look at your bike they will of fallen from the tank onto the floor as the tank bleeds
Nice bike